Sale of industrial degreasers in London : New generation stripper without methyl chloride - ARCADECAP SA

You are here : Home

New generation stripper without methyl chloride - ARCADECAP SA

Stripper without methyl chloride Paint stripper
Back Contact us

ARCADECAP SA is a powerful non-chlorinated solvent-based stripper.

 

ARCADECAP SA is a stripper with a good environmental profile without methylene chloride, methanol, or paraffin. ARCADECAP SA destroys any paint, varnish or coating. ARCADECAP SA respects the material (metal, cement, tiles…) without oxidation. Wetting power and strong penetrating capacity ensuring a deep stripping.
(*) A primer is necessary to eliminate epoxy-type paints.

Scope

  • Adapted for the removal of old paints, coatings and other varnishes, floor lacquer, and swimming pool paints.
  • After rinsing and drying, the surface is immediately ready to be painted/coated…
  • Wetting power and strong penetrating capacity ensuring a deep stripping.

Properties

  • Appearance  :Liquid, colourless to yellow
  • Density at 20° : 1.065
  • Flash point : 95°C

Consumption / Implementation

Ready to use product

  • apply an even layer
  • leave on for 30 min to a few hours according to the nature and the thickness of the coating. This length should be extended depending on the difficulty to strip the coating, possibly while multitasking over night for example.

 

The process can be improved by interposing a fabric or a cloth between the layers of stripper. This will increase the wetting power and penetration.

  • after blistering or softening, remove the coating (if needed, remove with a spatula or a wire brush) and start the pickling operation again, if needed.

 

Consumption :400 to 600 grams per m2 (according to the thickness and texture of the coating).

Packaging

1L, 5L and 20L
ARCADECAP paint stripper exists in liquid version and in jellified version, ideal for the stripping of vertical surfaces.